Battery grip for Nikon D80 SLR

1Product Description:

This product is the battery grip, Applicable for Nikon D80 SLR.

2Configuration

This product made up of 4pcs Lithium battery,2pcs PCB board, and housing.

Color: BLACK

Weight: 400g

Material: plastic

Dimension: Lmax137.8mm×Wmax72.5mm*Hmax105.4mm

Button: shutter /checking capacity, AE-L/AF-L

Charge Tip: DC4.0*1.7 cm

Discharge Tip: shrapnel

3Technic parameter

4Function & usage

charge

Use the Charger

Discharge

Take out the battery cover of Nikon D80,put the battery cover into the groove of the battery packs output jack(in case of losing).Put the battery pack into battery hole of camera and tighten the screws.

Capacity indication: press shutter button, when the capacity of battery pack more than 20%,the green LED lights about 3-5 seconds. When less 20%,red LED lights 3-5 seconds, its time to charge.

Control function of the camera:
1. function lock of the battery pack:  move the function lock to LOCK position, all of buttons on the battery pack wont work(expect checking the capacity);move the function lock to OPEN position, all the buttons will work well.

2.Shutter function:(function lock on the OPEN position)press shutter button, it will carry out the same function as shutter of the camera

3.AE-L/AF-L function:( function lock on the OPEN position)press AE-L/AF-L buttons, it will carry out the same function as AE-L/AF-L of the camera

4.menu guide function: ( function lock on the OPEN position),press ←↑→↓buttons, it will carry out the same function as the direction buttons of the camera.(when you carry out the menu choosing, press the menu buttons of the camera first to startup the interface of the menu, after pressing and setting button of direction, press the OK button of the camera to confirm

5Safety Certification

FCC CE

6Accessories

Charger: Input power supply100V240V 50/60Hz, Output charging voltage/Output charging current9V/1.3A

User manual and package

package: blister clamshell + insert card

user manual: card printing